Toshiba P840 Satellite TV System User Manual


 
SATA Interface setting
This feature allows you to set SATA interface setting.
Performance Let HDD/SSD work with maximum performance.
Battery life Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance
down.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
The Wake-up on LAN function consumes power even when the
system is off. Leave the AC adaptor connected while using this
feature.
Regarding Wake-up on LAN from sleep or hibernation, you must
check the "Allow the device to wake the computer" check box within
the LAN Device properties. (This feature does not effect the Wake-up
on LAN from sleep or hibernation.)
Power will be automatically turned on when a signal is received from an
administrator's computer which is connected via a network.
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled.
Enabled Enables Wake-up on LAN from shutdown.
Disabled Disables Wake-up on LAN from shutdown.
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled Enables Built-in LAN functions.
Disabled Disables Built-in LAN functions.
ODD Tray Lock
This tab allows you to set the condition for ODD tray lock.
Enabled The ODD tray automatically locks if vibration or
shock is detected when your computer is
powered by battery pack.
Disabled Disables ODD tray lock function.
User's Manual 5-15