Filter
Top Products
Make sure that your computer is running on AC power while using
CyberLink MediaShow.
Operate the computer at Full Power. Do not use power-saving
features.
CyberLink MediaShow cannot edit or play copy-protected content.
Do not enter Sleep or Hibernation Mode while using CyberLink
MediaShow.
Do not operate CyberLink MediaShow immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
Do not run software like a screen saver because it can put a heavy
load on the CPU.
DVD-VR format is not supported.
Before recording DVD-Video, AVCHD or Blu-ray Disc™
When you record DVD-Video, AVCHD or Blu-ray Disc™, please use
only discs recommended by the Drive manufacturer.
The following types of discs are supported for recording:
DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL & DVD+RW
BD-R, BD-R DL, BD-RE & BD-RE DL
Do not set the working drive to a slow device like a USB1.1 hard disk
drive or it will fail to write DVD-Video, AVCHD or Blu-ray Disc™.
Do not perform any of the following actions:
Operate the computer for any other function, including using a mouse
or Touch Pad, or closing/opening the display panel.
Bump or cause vibration to the computer.
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
Force eject the optical drive when burning.
Install, remove or connect external devices, including memory media
cards, USB devices, external displays, optical digital devices.
VCD and SVCD format for output is not supported.
About recorded DVD, AVCHD and Blu-ray™ discs
Some DVD-ROM drives for personal computers or other DVD players
may not be able to read DVD-R/DVD+R/DVD-RW/DVD+RW/DVD-
RAM discs.
When playing your recorded DVD on your computer, please use
TOSHIBA VIDEO PLAYER.
When playing your recorded Blu-ray Disc™ on your computer, please
use the TOSHIBA Blu-ray Disc Player.
If you use an over-used rewritable disc, the full formatting might be
locked. Please use a brand new disc.
User's Manual
4-26