Filter
Top Products
ENG-19ENG-18
Program Play & Random Play
Program Play (CD)
1. Press the PROG. button.
2. Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
3. Use the LEFT/RIGHT/UP/DOWN buttons to
select the first track to add to the program.
Press the ENTER button. The selection numbers
appear in the Program Order box.
4. Press and hold the PLAY/PAUSE ( ) button.
The disc will be played in programmed order.
Random Play (only CD-DA)
1. Press the PROG. button.
2. Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
3. You can see the RANDOM 1/2/3, choose a
number by using the LEFT/RIGHT buttons and
then press the ENTER button.
- Random 1: Plays all the tracks on a single disc
in random order and then stop.
- Random 2 : Plays all the tracks on current disc
in random order and then plays all
the tracks on each succeeding disc
in random order and then stops.
- Random 3 : Plays 3 tracks randomly from a disc
and then plays 3 tracks randomly
on other discs until all CD discs
turn twice.
4. To return to normal playback, press CLEAR
button.
Note
• Depending on a disc, the Program and Random
Play functions may not work.
• This unit can support a maximum of 20
programmed tracks.
• While in playback mode, press the CLEAR button
on the remote control to cancel Programmed Play
or Random Play.
• During EXCHANGE function, Random play doesn’t
work.
This feature allows you slowly to repeat
scenes containing sports, dancing, musical
instruments being played etc. so you can
study them more closely.
When playing a DVD
1. During play, press and hold the PLAY/PAUSE
( ) button.
2. Press and hold the button on the remote
during PAUSE or STEP mode. Press again and
you can select slow motion play for 1/8, 1/4 and
1/2 of normal speed.
3. Press the A-B RPT button to select the point
where the function starts. (A)
4. Press the A-B RPT button to select the point
where the function ends. (B)
Note
• The disc will play from A to B repeatedly at the
speed you chose.
•
To terminate the function, press the CLEAR button or
A-B RPT button again.
PROGRAM
RANDOM
PROGRAM
RANDOM
R1 R2 R3
CD
Track
Time
01
Random 1
0:00:48
Random
PROGRAM 01
Track
05 06 07 08
09 10 11 12
13 14 15 16
- - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
- - - - - - - -
Program Order
01 02 03 04
CLEAR
Repeat Play
Repeat the current track, chapter, title, a
chosen section (A-B), or all of the disc.
When playing a DVD/CD
1. Press the REPEAT button on the remote.
Repeat screen appears.
2. Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
• Chapter ( ) : repeats the chapter that is playing.
• Title ( ) : repeats the title that is playing.
• A-B : repeats a segment of the disc that you select.
* A-B REPEAT
• Press the REPEAT button. Select A-B on screen with
the LEFT/RIGHT buttons or press the A-B RPT button
on the remote.
• Press ENTER at the point where you want the repeat
play to start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat
play to stop (B).
• To terminate the function, press the CLEAR button or
A-B RPT button again.
• A-B REPEAT does not allow you to set point (B) until at
least 5 seconds has elapsed after point (A) has been
set.
3. Press ENTER.
4. To return to normal play, press REPEAT again,
then press the LEFT/RIGHT buttons to select Off
and press ENTER.
Note
• DVD repeats play by chapter or title, CD repeats
play by disc or track.
• Depending on a disc, the Repeat function may not
work.
Off 01 01 A - B
REPEAT
ENTER
T
Off 01 01 A - B
REPEAT
ENTER
T
D
DVD
CD
T
Slow Repeat Play
Toshiba-SD-6915 fix ok rev01 2004/6/04 07:30am Page 18