Filter
Top Products
26
Basic playback
Playing a Disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Basic playback
Preparations
• When you want to view a disc, turn on the TV and select the video input connected to the DVD video player.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD video player.
1
2
OPEN/CLOSE
3
4
Note
If the disc tray contains a disc you have already played,
playback will begin from the location where you last stopped
playback.
29
To start playback in the stop mode
Press PLAY.
PAUSE
STOP
PLAY
SKIP
OPEN/CLOSE
ON/STANDBY
PAUSE
1
2
,
43
STOP PLAY
Press the power button (ON/STANDBY).
The DVD video player turns on.
The ON/STANDBY indicator on the
player illuminates.
When the DVD video player is turned on for
the first time, a message appears. Press
ENTER, and make the proper settings before
proceeding to step 2.
55
Press OPEN/CLOSE.
The disc tray opens.
Place the disc on the disc tray.
With the playback
side down
• There are two different disc sizes. Place the disc in
the correct guide on the disc tray. If the disc is out of
the guide, it may damage the disc and cause the
DVD video player to malfunction.
• Do not place a disc which is unplayable in this DVD
video player.
OPEN/CLOSE
Press OPEN/CLOSE to close the disc
tray.
Playback starts.
If you insert a DVD video disc that contains a top
menu, a menu may appear. See “Locating a title
using the top menu.”
30
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the actual
DVD video disc.)
DVD
VCD
CD
PLAY
ON/STANDBY indicator