Toshiba SD-W1101 DVD Recorder User Manual


 
SD-W1101 DVD-RAM
with REALmagic Hollywood+ Playback Card
Installation Instructions
Congratulations on your purchase of a Toshiba SD-W1101 DVD-RAM
drive and REALmagic Hollywood+ DVD/MPEG-2 Playback Card Kit.
The following information will help you in the simple installation of
your new DVD-RAM. If you are not replacing a presently installed SCSI
CD-ROM with the enclosed DVD-RAM, additional installation hardware
may be required. Refer to REALmagic Hollywood+ User’s Guide for
installation instructions on the DVD/MPEG-2 Playback Card.
CHECKING YOUR KIT PACKAGING
Please unpack your DVD kit, and assure that you have the following
items:
l DVD/MPEG-2 PCI Playback Card (compatible with all graphics cards)
l 13” 3.5mm ext. audio cable
l 14” HDB15 - 9 DIN overlay cable
l S-Video to RCA video converter cable
l REALmagic™ Accessory Kit envelope
(with software, demo CD and Playback Card User’s Guide)
Additional items you may need that are not included in the kit are:
l Screwdriver
l mounting screws and mounting hardware
l SCSI interface cable
l SCSI host adapter board
l DVD/CD-ROM Sound Cable
SYSTEM REQUIREMENT
The DVD-RAM kit requires the following:
2MB of free hard disk space
16MB of RAM
Pentium-based PC (or compatible), 133MHz or higher
PCI 2.1 compliant expansion slot
VGA Card
Plug and Play BIOS support
Microsoft™ Windows 95 or higher
Amplified stereo speakers
1
1101kit.p65 2/10/99, 3:47 PM1