Filter
Top Products
5-6
Table 5-10-1 I
2
C control for each kind of video system
5-10. Video System Control Process
In the video system control process, control signals are
supplied to various video system process ICs shown in
the table below. Table 5-10-1 shows the I
2
C control for
each kind of video system.
Part No.
QV001
QV002
QV005
QV008
QV007
QV045
QB025
QV057
Part No.
QX004
QX007
QX204
QX404
QX604
QX001
QX002
Table 5-11-1 IC control for each kind of panel system
Type name
CXA1855Q
(Custom: $90)
TC9090N
(Custom: $B2)
TDA9141
(Custom: $8A)
TDA4780
(Custom: $88)
TDA4672
(Custom: $88)
CXA1315M
(Custom: $40)
CXA1315M
(Custom: $44)
M62320FP
(Custom: $71)
5-11. Panel System Control Process
The panel system control process supplies various
control signals to the panel system control ICs shown in
the table below.
Table 5-11-1 shows the IC control for each kind of panel
system.
Type name
SYG
(TC160G54AF1137)
CXA3106
TFORC
(TC203E2651AF-01)
M62320FP
(Custom: $78)
M62320FP
(Custom: $7A)
Process
I/O SW process
Color signal process (3D Y/C separation)
Sync detection process (Custom: $8B)
Signal kinds identification (NTSC/PAL/SECAM, etc.)
Video control (Density, hue)
Video control (Sharpness control)
Input SW, MIC SW
Volume, mute, MIC gain
Brightness, contrast, RGB gain
Sync information
Camera ON/OFF (for TLP511), focus, zoom reading
Fan switch open
Process
Various kinds of screen display process (position, picture frame,
property)
Screen position control (Vertical position, horizontal position)
Screen position control (sampling phase, sampling frequency)
Picture frame control (R)
Picture frame control (G)
Picture frame control (B)
Panel mode control
A/D sample phase (R)
A/D sample phase (G)
A/D sample phase (B)