Filter
Top Products
Setting up
your TV
14VL43U, 20VL43U(E/F/S)
14
Changing the on-screen display language
Choose from three different languages (English, French and Spanish) for
he on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, and then press x or • to display the FEATURE
menu appears.
2. Press y or z to highlight LANGUAGE.
FEATURE
AUTO POWER
INVERT
LANGUAGE
CAPTION
V
-
CHIP
ENGLISH
OFF
OFF
3. Press x or • to select your desired language.
Programming channels into the TV’s memory
When you press CHANNEL y z on the TV or remote control, the TV
stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed into the channel memory, use
the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV’s memory. After the channels are stored
automatically, you can manually add or erase individual channels (see
page 15).
To program channels automatically:
1. Press MENU, and then press x or • to display the SET UP menu.
2. Press y or z to highlight TV/CABLE .
3. Press x or • to select TV(if you use an antenna) or CABLE (if you
use Cable).
4. Press z to highlight SYSTEM.
5. Press x or • to select the correct color system.
AUTO, NTSC- M, PAL- M and PAL- N will appear cyclically.
Normally select AUTO.
This selection is necessary only when the color of a certain channel
is abnormal.
SET UP
SYSTEM
TV/CABLE
CH PROGRAM
EDIT
CH POSITION
ADD/ERASE
FAV. CH
TV
AUTO
12
ADD
CLEAR
SET UP
SYSTEM
TV/CABLE
CH PROGRAM
EDIT
CH POSITION
ADD/ERASE
FAV. CH
TV
AUTO
12
ADD
CLEAR
6. Press z to highlight CH PROGRAM.
[Continued on the next page]
MENU
yzx •
MENU
CHANNEL
NUMBERS
CHANNEL
yz
yzx •
14VL43U(E) 13-15 03.3.4, 9:48 AM14