Filter
Top Products
23
TV operation
TV operation
Adjust the volume level by pressing VOL + or –.
The volume level will be indicated on the
screen by white bars. As the volume level
increases, so do the number of bars. If the
volume decreases, the number of white bars
also decreases.
Set the TV/CABLE selection to the appropriate
position.
22
1
2
3
Press direct channel selection (0–9) to select
the channel.
TV mode direct channel selection
When the TV/CABLE selection is in the TV
position, all channels can be instantly selected by
using two buttons. (for example, to select channel
2, press “0”, then “2”.
If you press only “2”,
channel selection will
be delayed for a few
seconds.) For
channels 10 and
above, press the 2
digits in order.
4
Note:
If a channel with no broadcast is selected, the sound will
automatically be muted.
To turn on the TV/DVD, press POWER.
The Power indicator on the front of the main unit
will light.
POWER
VOL +/–
TV - VHF/UHF channels
CABLE
- Cable TV channels
CABLE mode direct channel selection
When the TV/CABLE selection is in the CABLE
position, channels can be selected as follows:
TO SELECT CABLE TV CHANNELS:
1-9: Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press
“002”.
10-12: Press “0”, then the remaining 2 digits.
Example, to select channel 12, press
“012”.
13-99: Press the 2 digits in order. Example, to
select channel 36, press “36”.
100-125: Press the 3 digits in order. Example, to
select channel 120, press “120”.
NOTE FOR CHANNELS 1-12:
If only 1 or 2 buttons are pressed, the corresponding
channel will be selected in 2 seconds.
CATV
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100) (125)
01
(5A)
TV
VHF
2-13
UHF
14-69
TV operation
VOLUME 32
ANT
02
TV operation
Auto power off
If a station being viewed stops broadcasting, the TV will
automatically shut itself off after 15 minutes.
0–9
J5X00221A [E] (P14-25) 21/02/2006, 8:39 PM23