Filter
Top Products
20
Adding channels to the TV’s memory
When you press CHANNEL ▲ / ▼ on the TV or CH
MM
MM
M/
??
??
? on the remote
control, your TV will stop only on the channels you have programmed into
the TV’s channel memory. Follow the steps below to program channels into
the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in its
memory. After the TV has stored the channels in its memory automatically,
you can add or erase channels manually.
To add channels automatically:
1. Press MENU, then press
or to
display the SETUP menu.
2. Press ▲ or ▼ until the TV/CABLE
selection is highlighted.
3. Press
or to highlight either TV or
CABLE, depending on which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press ▼ until the CH PROGRAM selection is highlighted.
5. Press
or to start channel programming. The TV will automatically
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message “PRO-
GRAMMING NOW PLEASE WAIT” appears.
6.
When channel programming is complete, the message “COMPLETED” appears.
7. Press CH
MM
MM
M/
??
??
? to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add or
erase specific channels manually.
To add or erase channels manually:
1. Press MENU, then press
or to display the SETUP menu.
2. Press ▲ or ▼ until the ADD/ERASE selection is highlighted.
3. Press
or to display the ADD/ERASE menu.
4. Press ▲ or ▼ to select ADD/ERASE,
then press
or .
5. Press ▲ or ▼ to select the desired
channel to be added or erased.Press
or to select either ADD or
ERASE.
6. Repeat step 5 for other channels you
want to add or erase, then press
ENTER.
7. Press EXIT to return to the normal screen.
To add a digital channel you are watching:
Select a channel you want to add. Press ▲ or ▼ to select ADDING CHAN-
NEL in step 4 above, then press
or .
To erase all channels from the channel memory:
Press ▲ or ▼ to select CLEAR ALL in step 4 above, then press
or .
All channels are erased from the channel memory. (You can still use the
Channel Numbers on the remote control to tune a channel.)
Changing channels
To change to the next programmed channel:
Press CHANNEL ▲ / ▼ on the TV or CH
MM
MM
M/
??
??
? on the remote control.
To change to a specific analog channel:
Press the CHANNEL Number buttons (0-9) on the remote control.
For example, to select channel 125, press 1, 2, 5.
To change to a specific digital channel:
Press the first 3 digits, then press the dash key (100/–), followed by the
remaining 3 digits.
For example, to select channel 015-001, press 0, 1, 5, Dash, 0, 0, 1.
Menu/Enter
Channel
MM
MM
M/
??
??
?
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
CABLE
:SELECT :ADJUST
SETUP
LANGUAGE
CLOCK SET
TV / CABLE
CH PROGRAM
ADD / ERASE
ENGLISH
TV / CABLE
:SELECT :ADJUST
Setting up
your TV
Channel
Numbers
Note:
You can add the channel manually (see
“Adding and erasing channels manually,”
below).
Exit
Note:
Digital cable channels may be represented by
channel numbers that include a “dash” (e.g.,
85–002). These digital channel numbers may
not match the numbers in the channel line-up
provided by your cable company. This is not a
malfunction.
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by the Earth’s magnetism). If this happens, use
the image tilt correction feature to obtain
the best possible picture.
To adjust the image tilt:
1. Press MENU, then press or until
the SETUP menu appears.
2. Press ▲ or ▼ to highlight IMAGE TILT.
3. Press or to adjust the picture tilt
(from –10 to 10).
SETUP
CLOSED CAPTION
CC ADVANCED
PICTURE SIZE
PICTURE SCROLL
IMAGE TILT
SIGNAL METER
0
OFF
:SELECT :ADJUST
Dash (100/–)
3Y90121A(E)_P14-21 4/6/06, 3:13 PM20