Filter
Top Products
16
3. Press or to display the V-CHIP menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code.
If you are accessing the V-Chip menus for the first time, select a
four-digit number to be your PIN code. Press ENTER. The
BLOCKING menu appears.
5. You may now enable blocking. See “Blocking programs by ratings”
(below), “Locking channels” (page 19), “To change your PIN code”
(below), or “Blocking unrated movies or programs” (page 19).
To change your PIN code:
1. Press MENU, then press
or to display the OPTION menu.
2. Press
or to highlight V-CHIP.
3. Press
or to display the V-CHIP menu.
4. Use the Channel Number buttons (0-9) to enter your PIN code.
Press ENTER. The BLOCKING menu appears.
5. Press or to highlight NEW PIN CODE and press or to
display the NEW PIN CODE menu.
6. Use the Channel Number buttons (0-9) to enter a new code. Press
ENTER.
7. Press EXIT to return to normal viewing.
Blocking programs by ratings
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a rating system to qualify the content of television programs, as
well. The MPAA, Youth TV, and TV ratings work with the V-Chip feature
and allow you to block programs according to the rating limits you set.
Note:
If you forget your PIN code, press RECALL
four times within five seconds from the V-CHIP
menu. This allows you to proceed to the
BLOCKING menu and resets your PIN code.
Using the TV’s
Features
SETUPPICTURE AUDIO
CH
OPTION
BLOCKING RESET
V-CHIP
PIN CODE
END EXIT
[0-9]
SET ENTER
SELECT
Menu/
Enter
Exit
Channel
Numbers
SETUPPICTURE AUDIO
CH
OPTION
SET RATING
V-CHIP
NEW PIN CODE
ADJUSTSELECT
BLOCKING OPTION
ENABLE BLOCKING ON OFF
START
START
START
Recall
3N42501B[E] (P14-25) 24/2/04, 10:56 AM16