Filter
Top Products
5
Set up
Preparation
Basic Operation
Advanced Operation
Reference Section
Connecting Your TV
If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this
section. (Cables are not supplied.)
●
A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F”
connectors.
●
Audio and video cables are usually color coded according to
use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo (or mono) left channel. If you look at
the rear panel of the TV, you will see that the terminals are
color coded in the same manner as the cables.
●
S-video cables provide better picture performance. S-video
cables can only be used with S-video compatible components.
●
ColorStream™ cables come in sets of three and provide the
best picture performance. ColorStream cables can only be
used with ColorStream compatible components.
ColorStream Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and to record
from one channel while watching another channel.
IN
OUT
ANT
S-VIDEO
VIDEO VIDEO
L/
MONO
R
AUDIO
L/
MONO
R
AUDIO
VIDEO
L
Y
R
AUDIO
VIDEO-1 VIDEO-2
C
B
C
R
COLOR
STREAM
INPUT
IN from ANT OUT to TV
CH3
CH4
S-VIDEO VIDEO OUT
LR
IN
OUT
OR
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
Tune the TV to channel 3 or 4 (whichever channel is vacant in your
broadcast area), then use the converter box to change channels.
IN OUT
IN
OUT
ANT
S-VIDEO
VIDEO VIDEO
L/
MONO
R
AUDIO
L/
MONO
R
AUDIO
VIDEO
L
Y
R
AUDIO
VIDEO-1 VIDEO-2
C
B
C
R
COLOR
STREAM
INPUT
Caution:
Do not plug the TV in until you have finished
connecting all of your equipment.
Caution:
If using a mono VCR, connect L/Mono to VCR
Audio OUT using only one audio cable.
If you have a S-VHS VCR, use the S-video
connections and remove the video cable.
Do not connect the video cable and the S-
video cable to VIDEO 1 simultaneously.
Note:
The VIDEO 2 jacks can also be used for
connecting a second piece of video equipment,
such as a video disc player or camcorder etc.
with audio/video outputs.
Note:
When you use a converter box with your TV,
there may be features that you cannnot
program using the Remote Control, such as
blocking channels, and programming your
favorite channels.
Stereo VCR
Cable lead-in or
antenna
Cable converter
box
From cable
TV
Antenna Coaxial Cable
AUDIO/VIDEO Cables
S-Video Cable
TV
Set up