Toshiba 32A33 CRT Television User Manual


 
14
Using the
Remote Control
Using the remote control to operate a cable converter box,
satellite receiver, VCR, DVD player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote control is not preprogrammed to operate, you must
first program the remote control to recognize the device (if you have not already done so). See pages 12 and 13.
To use your TV remote control to operate a:
cable converter box or satellite receiver, set the Device Switch to CBL/SAT.
VCR, set the Device Switch to VCR.
DVD player or HTIB, set the Device Switch to DVD.
Note:
Even after the TV remote control is programmed,
it may not operate certain features on your other
device. If this happens and you wish to use those
features, you will need to use the device’s original
remote control.
This illustration describes typical external device
functions (not TV functions). The buttons on this
remote control may or may not work as described
for your specific device.
Point the remote control
directly at the device.
CH st
s
selects the next higher channel;
t
selects the next lower channel.
STOP
Stops the tape or DVD.
PLAY
Begins playback of a tape or DVD.
FF
Fast-forwards the tape or DVD. (Press during playback
to view the picture moving rapidly forward.)
REW
Rewinds the tape or DVD. (Press during playback
to view the picture moving rapidly backward.)
TV/VCR
To view one program while recording
another, press to select TV
mode.
REC
Starts recording.
PAUSE
Press during playback or recording to
pause the picture; press again to restart.
Channel Numbers
Press to directly access channels
(as opposed to CH
st
).
POWER
Turns the selected device on and off.
ENTER
DVD ENTER function.
Device Switch
Set to TV to control the TV; CBL/SAT to control a cable
converter box or satellite receiver; VCR to control a VCR;
DVD to control a DVD player or HTIB.
}
SKIP/SEARCH
|
TT
Skips back to beginning of current DVD
chapter or previous chapters.
SKIP/SEARCH SS
|
Skips forward to beginning of next
DVD chapter.
DVD MENU
Accesses a DVD’s menu system.
+10 / 100
Accesses DVD chapters higher than 10,
or VCR channels higher than 100.
stT S
Navigate DVD menus.
}
ENT
Required by some VCRs and cable
converter boxes to change the channel.
TOP MENU (SLEEP)
Accesses a DVD’s top menu.
CLEAR
DVD CLEAR function.
RECALL
DVD DISPLAY function.