Filter
Top Products
32
Using the TV’s
Features
Adjusting the sound quality
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
1. Press MENU, then press
or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight the item you want to adjust.
3. Press or to adjust the level.
•
makes the sound quality weaker or increases the balance in
the left channel, depending on the item selected.
• makes the sound quality stronger or increases the balance in
the right channel, depending on the item selected.
AUDIO
MTS
BASS
TREBLE
BALANCE
AUDIO LANGUAGE
DIGITAL OUTPUT
STEREO
:SELECT :ADJUST
25
25
0
PCM
To listen to a second audio program (SAP):
1. Press MENU, then press or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight MTS.
3. Press or to highlight SAP. The TV speakers will output the
second audio program instead of normal audio.
4. Press EXIT to return to normal viewing.
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is off,
the screen will display the word MUTE in the lower right-hand corner.
To restore the sound, either press MUTE again or press VOL+/–.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature provides high-fidelity stereo
sound. MTS also can transmit a second audio program (SAP) containing
a second language or other audio information (when available.)
Note: The MTS feature is not available in VIDEO mode.
When the TV receives a stereo or SAP broadcast, the word
“STEREO” or “SAP” displays on-screen every time you turn on
the TV, change the channel, or press RECALL.
To listen to stereo sound:
1. Press MENU, then press or to display the AUDIO menu.
2. Press ▲ or ▼ to highlight MTS.
3. Press or to highlight STR (stereo.)
Note:
• In general, you can leave your TV in stereo mode because the
TV automatically outputs the type of sound being broadcast
(stereo or mono.)
•
If the stereo sound is noisy, select MONO to reduce the noise.
4. Press EXIT to return to normal viewing.
Mute
Exit
Recall
Menu
AUDIO
MTS
BASS
TREBLE
BALANCE
AUDIO LANGUAGE
DIGITAL OUTPUT
STR / SAP / MONO
:SELECT :ADJUST
25
25
0
PCM
Note:
A second audio program (SAP) can be heard
only on those TV stations that offer it.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program’s normal audio.
However, if you have SAP on, and the station
you are watching is not currently
broadcasting a second audio program, the
station’s normal audio will be output;
however, occasionally there is no sound at all
in SAP mode. If this happens, set the MTS
feature to STEREO mode.
Volume +/–
J3W30421A(E)_P31-Back 22/03/2006, 4:23 PM32