Toshiba 32HF73 CRT Television User Manual


 
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
31
123
456
7
89
ENT
100
0
POWER
RECALL
CHRTN
FAV
FAV
TV
/
VIDEO
+10
PIC SIZE
EXIT
INFO
STOP
POP DIRECT CH MUTE SLEEP
TV/VCR PAUSE
FFREW
SKIP
/
SEARCH
SPLIT
SWAP POP CH
LIGHT
REC
CH SCAN
FREEZE SOURCE
PLAY
TV
CBL/SAT
VCR
DVD
VOLCH
FA
VORITE
ENTER
DVDMENU
MENU
T
O
P
M
E
N
U
G
U
I
D
E
C
L
E
A
R
E
N
T
E
R
Using the POP double-window feature
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
To display a TV broadcast in the POP window:
1. Press SPLIT to display the POP window.
POP
12
2. Select channels of the POP window in the following two ways:
•To change to a specific channels, press POP DIRECT CH.
While “POP” is on the screen, press the Channel Number
buttons (0-9 and 100).
•To change the next programmed channels, press POP CH
zy.
If the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
blocked (see “Using the V-CHIP menu” on page 36).
POP
BLOCKED
24
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see “Connecting your
TV” on page 7).
2. Select the TV program you want to watch in the main window.
3. Press SPLIT to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP
window (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
or ColorStream HD2 only; you cannot select DVI in POP
mode). The current source will display in purple.
5. You can play a tape as the POP picture, or select a channel for the
POP window using the VCR’s channel keys.
POP SOURCE SELECT I ON
0 : TV
1
VIDEO
V1 :
2 :
3 :
4 : Color Stream HD1
5 : Color Stream HD2
IDEO
2
VIDEO
3
0 - 5 : TO SELECT
While the above menu is on the screen, you can select the desired signal
input source by pressing the corresponding number button (0-5).
To close the POP window:
Press SPLIT again or EXIT.
POP CH zy
SPLIT
SOURCE
Main window POP window
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
EXIT
POP DIRECT CH
Channel
Number
Note:
The SPLIT buttons on the remote control
operate the TVs POP features.
You cannot access POP features when
viewing DVI input.
You cannot display the ANT-2 signal source
in the POP window.
You can choose to hear the sound of either
the main or POP program (see Selecting
dthe Audio OUT sound on page 51).