Filter
Top Products
26
(E) 46/52/62HM95
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Using the remote control
3
Note: The error message “Not
Available” will appear if you press a
key for a function that is not available
The buttons used for operating the TV only are described here. For a
complete list of the remote control’s functions, see the remote control
functional key chart on pages 29–30.
For a list of the buttons that operate the TV Guide On Screen
®
system,
see page 54.
POWER
turns the TV on and off.
Note: The Quick Restart setting will affect the amount of time it takes for
the picture to appear when you turn on the TV. See page 51 for details.
SLEEP
accesses the sleep timer (page 91).
LIGHT
The first press of the LIGHT button lights the keypad and turns
on the Illumination mode. With the Illumination mode on, pressing any
key lights the keypad for 5 seconds (10 seconds if you’re in programming
mode). Subsequent presses of the LIGHT button toggle between turning
the Illumination mode on and off.
Channel Numbers (0–9, –/100)
directly tune channels. The “–” button is
used to tune digital channels (page 71) or to display the favorite channel
list (page 44).
INPUT
selects the video input source (page 67).
MODE
cycles through the six remote control device modes: TV, CBL/SAT,
VCR/PVR, DVD, AUDIO1, and AUDIO2. The mode indicator light
will remain lit for a few seconds (page 28).
PIC SIZE
cycles through the five pictures sizes: Natural, TheaterWide 1/2/
3, and Full (page 72).
TheaterNet™ DEVICE
displays a list of available TheaterNet devices (page
45).
TheaterNet™ CTRL
accesses the on-screen IR device control icons (page 46).
MENU
accesses the main TV menu system (pages 35 and 36) or opens a
menu in the TV Guide On Screen
®
system (Chapter 7).
TV GUIDE
opens the TV Guide On Screen
®
system (Chapter 7).
INFO
provides detailed information on highlighted items in the TV Guide
On Screen
®
system (Chapter 7).
ENTER
activates highlighted items in the main menu system and the
TV Guide On Screen
®
system.
Arrow buttons (yz x •)
When a menu is on-screen, these buttons select or
adjust programming menus. (Also see
x / • on the next page.)
CH yz
cycles through programmed channels when no menu is on-screen
(42) and functions as page up/down when a menu is on-screen or when the
TV Guide On Screen
®
system is open (Chapter 7).
VOL yz
adjusts the volume level.
Learning about the remote control
HM95_R1_026-34_061505 6/24/05, 9:26 PM26