Filter
Top Products
29
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Changing the location of the PIP window
With the TV in PIP mode, press LOCATE to change the location of
the PIP window on-screen. Every time you press LOCATE, the PIP
window changes position counter-clockwise.
Freezing the PIP display
With the TV in PIP mode, press STILL to freeze the PIP display. The
PIP picture becomes still, and is outlined in red on-screen. Press
STILL again to restore the moving picture (outlined in green).
Still
Watching multi-window PIP
The multi-window PIP features displays the channels you pro-
grammed into the TV’s memory (page 17) in six small boxes across
the bottom of the screen.
Note: The LOCATE, SWAP, PIP CH
yz, SOURCE, and STILL
buttons do not function in multi-window PIP mode.
To view multi-window PIP:
Press PIP three times.
The TV cycles through all of the programmed channels, showing a
few seconds of each channel’s programming, and then freezes the
image and moves on to the next channel in a continuous cycle. The
channel number appears above each PIP window.
A
14 23 27 30 43 56
X
To turn off multi-window PIP:
Press PIP again, or change the channel.
Note:
The multi-window PIP feature displays
channels you programmed for the signal
source you are currently viewing (TV or
Cable).
ADV/
PIP CH
ADV/
PIP CH
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
C.CAPT
EXIT
MENU
RESET
SWAP
PIP CH
CT-9946
SOURCE
PIP
STILL
LOCATE
Note:
If V-Chip blocking is enabled when
you view multi-window PIP, channels
exceeding the rating limits will appear
as a black window with an “X.”