Filter
Top Products
25
Reference
Welcome to
Toshiba
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
AppendixIndex
Changing the position of the small picture
With the TV in PIP mode, press LOCATE to change the display
position of the small picture. Every time you press LOCATE, the
small picture display changes position in a counter-clockwise manner.
Freezing the small picture
With the TV in PIP mode, press STILL to freeze the small picture.
The small picture becomes a still picture (outlined in red in the on-
screen display). Press STILL again to return to the moving picture
(outlined in green in the on-screen display).
Still
Watching multi-window PIP
Multi-window PIP appears as six small boxes across the bottom of the
screen. Multi-window PIP cannot be viewed unless channels are
programmed into the TV’s memory (see “Adding channels to the TV’s
memory” on page 12).
Note: The LOCATE, SWAP, PIP CH
yz, SOURCE, and STILL
buttons do not work in Multi-window PIP mode.
To view multi-window PIP:
Press PIP three times.
The TV cycles through the programmed channels and shows a few
seconds of each channel’s programming, then freezes the image and
moves on to the next channel in a continuous cycle. The channel
number appears above each small PIP window.
A
14 23 27 30 43 56
To turn multi-window PIP off:
Press PIP again or change the channel.
Note:
Multi-window PIP shows channels
programmed for the signal source you are
currently viewing (ANT-1 or Cable).
CH RTN
ADV/
PIP CH
ADV/
PIP CH
TV
CABLE
LIGHT
MUTE TV/VIDEO
TIMER
RECALL
POWER
VCR
CH
VOL
ENT
ENTER
PLAY PIP
REC
STILL LOCATE SWAP
TV/VCR REW FF
STOP SOURCE
FAV
FAV
EXIT
MENU
RESET
1
4
7
2
5
8
3
6
9
0
100
PIP Channel
PIP
Source
Swap
Locate
Still
C.CAPT
Channel