Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
25
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
3. Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE
CLOCK
ANT
ADD ADD ERASE/ERASE/
TV
CH
PROGRAM
CABLE/CABLE
1 ANT1/2
SET
ENGL SHI
00:00
T I LT CORRECT I ON
0
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Press z to add (or erase) the channel.
6. Repeat steps 1-5 for other channels you want to add or erase.
Adjusting the tilt correction feature
When you install the TV or change the direction of the TV, the
picture may suffer from color shading and/or tilt of the picture
because of the Earth’s magnetic field. If so, the following adjustment
should be made for the best possible picture.
To adjust the tilt correction:
1. Press MENU, then press x or • until the SET UP menu
appears.
2. Press y or z to highlight TILT CORRECTION.
3. Press x or • to correct any tilt of the picture between +10 and
-10.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
2 3 4 5 6 7 8 9 10 11 12 13 14 1516 17 1819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
+
7
SET UP
LANGUAGE
CLOCK
ANT
ADD ADDERASE/
TV
CH
PROGRAM
CABLE/CABLE
1 ANT
00:00
1/2
SET
ENGL SHI
CORRECT ONI
T I LT
CHANNELVOLUMETV/VIDEOMENUDEMO
MENU x•zy
Channel zy
MENU
yzx •
Channel
Number
TV front panel
Channel yz