Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
26
Adjusting the color convergence
This projection TV uses three separate TV tubes: red, green, and blue.
The red, green, and blue images are projected onto the screen where
they converge to form a full-color picture. You can see a clear picture
only when the three images converge correctly. Convergence may drift
over time or if you move the TV. If you can see clear images on your
TV screen, skip this procedure.
Make this adjustment after the TV has been on for at least 30
minutes.
To use the TOUCH FOCUS (auto convergence) button:
Press TOUCH FOCUS on the TV once. The TV will enter the
auto convergence mode and correctly adjust convergence
automatically.
TOUCH FOCUS
TOUCH FOCUS
F I N I SHED
Horizontal
Vertical
When the adjustment is complete, the normal picture will
reappear.
If the message “Touch Focus Error” appears, retry the TOUCH
FOCUS adjustment or adjust the convergence manually, as
described below.
To check and adjust the color convergence manually:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight CONVERGENCE.
P CTURE ANTENNAI
MODE SPORTS
PREFERENCE
FLESH TONE ON
OFF
COOL
DNR
C I NEMA MODE F I LM / V I DEO
CONVERGENCE
SAVE NEW
COLOR
TEMPERATURE
BRG
MENU
yzx •
TOUCH FOCUS
P
O
TV/VIDEO
TOUCH FOCUS
MENU EXIT
VOL
CH
CH
VOL
MENU yzx •
MENU
VOL VOL
CH
CH
EXIT
TV/VIDEO TOUCH FOCUS
POWER
MENU yzx •
43HX71
53HX71
TOUCH FOCUS
TV front panel