Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
51
yzx •
MENU
RECALL
Selecting the background of the menu display
You can change the background of the menu display by selecting from
two preset types: shaded and solid (gray).
To select the background:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight BACKGROUND.
3. Press x or • to select either a SHADED or SOLID background.
CUSTOM
T I MER 0 0 0
CC C 1
FAVORI CH1TE
FAVORI CH2TE
V
BACKGROUND SHADED SOL I D/
I DEO
CH
LABEL
LABEL
ING
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Antenna mode (when in TV mode)
• Channel number or VIDEO mode selected
• Time (if set)
• Channel label (if set)
• Stereo or SAP audio status
• V-CHIP rating status
ANT
ABCD
STEREO
SAP
TV
-
LVPG
CABLE9:25
1
6
Viewing the demonstration mode
The demonstration mode is an option available in the MENU button
on the TV front panel that will demonstrate several of your TV’s
features.
To start the demo:
Press and hold MENU on the TV for 4 seconds.
To stop the demo:
Press RECALL, EXIT, or POWER.
Understanding the auto power off feature
The TV will automatically turn itself off after approximately 15
minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day. This feature does not work in VIDEO mode.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns the TV on automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.