Filter
Top Products
17
GETTING STARTED
USING THE TV'S
FEATURES
EQUIPMENT
CONNECTIONS
REFERENCE
INTRODUCTION
VIEWING
TELETEXT
Toshiba 32JW8UA (E)
To select the Digital Noise Reduction
If the receiving signal is weak and the picture is blurry, the
picture may be improved when using this function. You
can select the picture quality among five modes.
Press the MENU button,
then press the
< or >
button to display the
PICTURE menu.
Press the or button
to select the DNR.
Press
< or > button to
select Auto, Low, Mid,
High or Off.
To turn off the Digital Noise Reduction
Select Off in step 3 above.
Note
This function is available for the 480i and 576i signals.
To use the Super Woofer
Press the button to
display the Super Woofer
level.
While the Super Woofer display is on the screen,
press the ;
+ or ; – button to adjust the Super
Woofer level.
To turn off the Super
Woofer, press the
button to display Super
Woofer Off.
Note
The selected On or Off mode and the adjusted level are
stored in the “Memory” of the selectable sound (see page
15).
Digital Noise Reduction (DNR)/Super Woofer/Cinema mode/Blue Screen
1
2
81
Super Woofer : On
81
Super Woofer : Off
To set the Cinema mode to "AUTO"
A movie film features a picture with 24 frames a second,
whereas the movie software like the DVD and so on that
you enjoy watching television at home is changed to the
picture of 30 (NTSC) or 25 (PAL) frames a second. To
convert this signal to reproduce the smooth motion and
picture quality, select the Auto mode.
Effective signal and setup conditions
• When the Video input mode is selected
• When the input signal format is 480i or 576i signals
Press the MENU button,
then press the
< or >
button to display the
PICTURE menu.
Press the
or button
to select Cinema mode.
Press the
< or > button
to select Auto or Off.
Note
A DVD movie with a subtitle is input from a DVD player,
the Cinema mode may not operate correctly.
To activate the blue screen
With the blue screen function On, the screen will
automatically turn blue and the sound will be muted when
no signal is being received.
Press the MENU button,
then press the
< or >
button to display the
FUNCTION menu.
Press the or button
to select Blue screen.
Press the
< or > button to select On or Off.
Notes
• If the blue screen tends to miss-operate due to unstable
signal strength or frequency, select “Off” in step 2.
• While in the PC input mode (see page 22), the Blue
screen is not available.
1
2
MENU
Back Watch TV
EXIT
PICTURE
Sharpness
Tint
0
0
100Hz
Scan mode
Auto
DNR
Off
Cinema mode
Auto
Cinema mode
MENU
Back Watch TV
EXIT
50
50
PICTURE
Sharpness
Tint
Color
Brightness
0
0
100
Contrast
MENU
Back Watch TV
EXIT
50
PICTURE
Sharpness
Tint
Color
0
0
100Hz
Scan mode
Auto
DNR
1
2
3
3
Auto
DNR
MENU
Back Watch TV
EXIT
Blue screen
On
FUNCTION
TEXT
FAST
1
2
#32JW8UA_17-24.p65 04.10.25, 10:26 AM17
Black