Filter
Top Products
19
GETTING STARTED
USING THE TV'S
FEATURES
EQUIPMENT
CONNECTIONS
REFERENCE
INTRODUCTION
VIEWING
TELETEXT
Toshiba 32JW8UA (E)
Stereo programs
When a stereo program is
received, m Stereo
appears.
Press the mI/II button to
select the stereo or
monaural mode. m
Stereo and
Mono
appear cyclically on the
screen.
Setting the MTS mode
AUTO mode
The MTS AUTO mode automatically recognizes stereo/
bilingual programs depending on the broadcast signal.
Press the MENU button,
then press the
< or >
button to display the
SOUND menu.
Press the or button
to select MTS, then press
the
< or > button to
select Auto or Mono.
Mono mode
If you experience noise or poor reception of any stereo/
bilingual program, set the MTS mode to Mono.
Noise will be reduced and reception may improve.
Note
If you experience noise with a particular program whose
channel reception is usually good, try setting MTS mode
to Auto, then switch the mI/II button to
Mono
(monaural) (refer to the chart at right).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programs are received.
Press the MENU button, then press the
< or > button
to display the SOUND menu.
Press the or button
to select Dual, then press
the
< or > to select Dual
1 or Dual 2.
Notes
• When the MTS setting is in Mono mode, the Dual menu
is not selectable.
• The Dual menu setting status remains even if the TV is
turned off.
1
2
To select the MTS (Multi-channel TV Sound) mode and the stereo/bilingual mode
1
2
MENU
Back Watch TV
EXIT
+15
+50
SOUND
Balance
Treble
Bass
0
SRS 3D
Normal
SRS WOW
On
MENU
Back Watch TV
EXIT
SOUND
SRS WOW
On
SRS 3D
Normal
SRS TruBass
Normal
MTS
Stable sound
Auto
Off
4
Stereo
ABCD
Stereo
2
1
MENU
Back Watch TV
EXIT
SOUND
SRS 3D
Normal
SRS TruBass
Normal
Dual
Stable sound
Dual 1
Off
MTS
Auto
Sound to be heard
Display
German stereo/
bilingual broadcast
NICAM
Sub I sound
Sub II sound
Main sound
Main sound
Sub sound
—
Dual 1
Dual 2
Mono
1
2
• These settings are not stored in the TV memory.
Reception mode
Stereo
Monaural
Display
m Stereo
Mono
Bilingual programs
When a bilingual program
is received, Dual
appears.
Press the mI/II button to
select the sound to be
heard. The sound differs
according to the
transmission
system: NICAM or German stereo bilingual broadcast.
Dual 1, Dual 2 and Mono appear cyclically
on the screen.
ABCD4
Dual
Dual I
#32JW8UA_17-24.p65 04.10.25, 10:26 AM19
Black