Toshiba 27AF41 CRT Television User Manual


 
18
Setting up
your TV
27/32/36AF41(E)
Adding and erasing channels manually
After you have automatically programmed the channels into the TVs
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TVs memory:
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the CHANNEL
NUMBERS to select the channel.
2. Press MENU.
3. Press
x or to highlight the SET UP menu.
4. Press
y or z to highlight ADD/ERASE.
MOVE SELECT
[
]
[
]
LANGUAGE:
TV/CABLE:
CH PROGRAM
ADD/ERASE:
MORE
[ENGLISH]
FRANCAIS ESPANOL
[TV] CABLE
[ADD] ERASE
SET UP
5. Press x or to highlight ADD or ERASE, whichever function
you want to perform.
6. Press MENU.
7. Repeat steps 16 for other channels you want to add or erase,
or press EXIT to return to normal TV viewing.
Changing channels
To change to the next programmed channel:
Press CHANNEL
yz.
To change to a specific channel (programmed or unprogrammed):
Press the CHANNEL NUMBERS (09 and 100).
Note: For channels 100 and higher, press the 100 button, and
then the next two channel numbers (for example, to select
channel 100, press 100, 0, 0; to select channel 125, press
100, 2, 5).
Image tilt correction
When you install or change the direction of the TV, the picture may
become tilted (caused by terrestrial magnetism). If this happens, use
the image tilt correction feature to obtain the best possible picture.
To adjust the image tilt:
1. Press MENU, and then press
x or until the SET UP menu
appears.
2. Press
y or z to highlight IMAGE TILT.
3. Press
x or to adjust the picture tilt (from 10 to +10).
MOVE SELECT
[
]
[
]
SET UP
+
MORE
DEMO [START] STOP
IMAGE TILT +3
Menu
Channel
DEMO MENU TV/VIDEO VOLUME CHANNEL
POWER
TV
CABLE
VCR
MENU/
ENTER
CH RTN
RECALL MUTE
CH
CH
VOL VOL
1
4
7
2
5
8
3
6
9
0
ENT
100
POWER
o
EXIT
TV Front Panel
MENU
yz x
EXIT
CHANNEL
yz
CHANNEL
NUMBERS