Filter
Top Products
15
AUTO CLOCK SETTING
The auto clock function will automatically set the built-in clock (Month, Day, Year and Time) when the TV/VCR is
connected to an antenna or cable TV system and it is turned off. As the TV/VCR searches for a receivable station
in your area and it receives a broadcast signal for auto clock, the auto clock needs several minutes to set itself.
AUTO CLOCK ADJUSTMENT
The auto clock adjustment will be performed at 12:00 PM everyday if you turn off the TV/VCR.
• If you use a cable box and you want auto clock adjustment to be performed, the cable box must be left on.
• The auto clock adjustment is not effective when there is a difference of more than 5 minutes exists between
the built-in clock time and the actual time.
TO SET AUTO CLOCK TO OFF
TO SET STANDARD TIME
In the rare event that you live within broadcast range of two stations in two different time zones, the TV/VCR may
recognize the wrong station for the auto clock set.
To correct the situation:
1. Press MENU.
2. Press
B or A to select option.
3. Press ▲ or ▼ to select “STANDARD TIME”, then press
A.
4. Press ▲/▼/
B/A to select your time zone, then press ENTER.
ATLANTIC : GMT – 4 hours (GMT: Greenwich Mean Time)
EASTERN : GMT – 5 hours
CENTRAL : GMT – 6 hours
MOUNTAIN : GMT – 7 hours
PACIFIC : GMT – 8 hours
ALASKA : GMT – 9 hours
HAWAII : GMT – 10 hours
AUTO : AUTO SET
5. Press MENU repeatedly until the menu screen is cleared.
NOTE: To be able to select the standard time, the clock must first be set by “AUTO CLOCK” once.
When shipped from factory the AUTO CLOCK option is set to “ON”.
But if you do not want Auto Clock set (Adjustment):
1. Turn on the TV/VCR.
2. Press MENU.
3. Press
B or A to select option.
4. Press ▲ or ▼ to select “AUTO CLOCK”.
5. Press
B or A to select “OFF”.
6. Press MENU repeatedly until the menu screen is cleared.
• When the “AUTO CLOCK” is set to “OFF”, the auto clock adjustment does not function.
• Set the clock manually (see page 17).
1. Connect the antenna or cable TV system.
• If you use a cable box, turn it on.
2. Plug the AC power cord to the AC outlet.
3. Make sure the TV/VCR is turned off.
• If you press POWER, the auto clock set is not effective.
4. Wait at least three minutes and press POWER.
5. Press CALL to check the clock on the screen.
6. If the clock is not set, check the antenna condition. The auto clock may not function properly if the reception
condition is not good.
AUTO CLOCK SETTING
5L80301C P10-19 20/4/04, 16:2615