Filter
Top Products
48
4
Press PLAY on the playback
VCR or Camcorder.
NOTES:
•
It is recommended that the tape speed be set to the SP mode on the TV/VCR for best result.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials
may infringe the rights of copyright owners and be contrary to copyright laws.
CONNECTION TO ANOTHER VCR
DUPLICATING A VIDEO TAPE
Insert a blank cassette with the erase preven-
tion tab intact into the TV/VCR.
Insert a previously recorded cassette into the
playback VCR or Camcorder.
LINE
Playback Camcorder
3
5
2
1
If you connect the TV/VCR to another VCR or Camcorder, you can duplicate a previously recorded tape. Make
all connections before turning on the power.
To AUDIO
OUT
To VIDEO
OUT
Playback VCR
Audio/Video cable (not supplied)
To Video/Audio In
Audio/Video cable (not supplied)
To AV jack
Recording TV/VCR
CONNECTION TO CAMCORDER
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown below.
Recording TV/VCR
To Audio In
To Video In
Press both REC at the same
time on the remote control of
the TV/VCR.
Press INPUT SELECT to select AUDIO/
VIDEO input position. “LINE” will appear on
the screen.
PLAY
INPUT
SELECT
REC
Press STOP after duplicating
a video tape.
STOP
5L80301C P44-BACK 20/4/04, 16:2948