Filter
Top Products
32
Recording
Press STOP to stop recording.
“ ” will appear on screen for about
4 seconds.
Note:
The pause function will be released after 5 minutes to prevent
damage to the tape or the unit. The unit will change to the STOP
mode.
To stop recording temporarily
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
Auto Rewind feature
To stop recording
CH 110
Note:
If the erase prevention tab is removed, the tape will eject when
REC is pressed for recording.
Press PAUSE/STILL to avoid recording unwanted
material.
“
” will appear on the screen and
the REC indicator will blink on and
off. Press PAUSE/STILL or REC to
continue the recording.
Recording a TV program
Recording and viewing the same TV program.
Load a cassette tape with the erase
prevention tab intact.
The unit will automatically turn on.
1
CH 110
Press SPEED to select the desired tape speed
SP or SLP.
The tape counter and SP or SLP will
appear on the screen for about 4
seconds.
2
Select “TV” or “CABLE” to the appropriate
position
21
.
3
TV - VHF/UHF channels
CABLE - Cable TV channels
Press Direct channel selection (0–9) or CH /
to select the channel to be recorded.
4
Press REC to start recording.
“ ” will appear on the screen for
about 4 seconds and the REC
indicator on the front panel will light.
5
Notes:
• The unit channel cannot be changed during recording.
• If power is switched off during recording, the TV goes off and
the VCR continues to record. Press STOP to halt the
recording and turn off the VCR.
STOP
Recording a TV program
PAUSE/STILL
REC
CH
/
0–9
SPEED
5S20101A [E]p32-36 12/16/04, 4:28 PM32