21
Basic setup
POWER
Clock setting
The auto clock function will automatically set the built-in clock (Month, Day,
Year and Time) when the unit is connected to an antenna or cable system
and it is turned off. As the unit searches for a receivable station in your area
and it receives a broadcast signal for auto clock, the auto clock needs
several minutes to set itself.
Preparation:
• Connect the antenna or cable system.
• If you use a cable box, turn it on.
• Plug the AC power cord to the AC outlet.
Auto clock setting To set auto clock to OFF
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
Make sure the unit is turned off.
• If you press POWER, the Auto Clock
set is not effective.
Press TV/VCR to select TV/VCR mode.
The Auto clock adjustment will be performed at
12:00 PM everyday if you turn off the unit.
• If you use a cable box and you want Auto Clock adjust-
ment to be performed, the cable box must be left on.
• The Auto Clock adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
• Depending on the reception
condition, it may take approx. thirty
minutes.
• The POWER indicator will light.
1
Wait at least three minutes and press POWER.
2
3
Auto clock adjustment
To set auto clock to OFF
When shipped from factory the AUTO CLOCK is set to “ON”.
But if you do not want auto clock set (Adjustment):
Press MENU in the TV mode, then press
or to select TV SETUP menu.
1
Press or to select “AUTO CLOCK”.
2
Press
or
to select “OFF”.
3
Press MENU repeatedly until the menu
screen is cleared.
• When the AUTO CLOCK is set to
“OFF”, the Auto Clock adjustment
does not function.
• Set the clock manually
23
.
4
Notes:
• If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity,
etc., may affect the player's operation. Disconnect the AC power
cord once, then connect it again.
• The TV section has its own menu and also DVD section has
its own menu
72
.
•
If no buttons are pressed for more than 60 seconds, the TV/VCR
menu screen will return to normal TV operation automatically.
MENU
C/D/B/A
RETURN
ENTER
TV/VCR
POWER
TV SETUP
LANGUAGE
CLOCK SET
AUTO CLOCK
STANDARD TIME
DAYLIGHT
ENGLISH
ON
AUTO
:SELECT
SAVING TIME
:ADJUST
RETURN:END
TV SETUP
LANGUAGE
CLOCK SET
AUTO CLOCK
STANDARD TIME
DAYLIGHT
ENGLISH
ON/OFF
AUTO
:SELECT
SAVING TIME
:ADJUST
RETURN:END
TV SETUP
LANGUAGE
CLOCK SET
AUTO CLOCK
STANDARD TIME
DAYLIGHT
ENGLISH
ON/OFF
AUTO
:SELECT
SAVING TIME
:ADJUST
RETURN:END
5V90101A [E]p20-23 8/4/06, 5:44 PM21