Filter
Top Products
- 22 - EN
If you attempt to enter a number greater than the total time
of the disc or current title, it clears the numbers entered
and waits for you to enter again.
If you wait ten seconds without pressing any key for
selecting scenes, the operation is cancelled.
Accessing tracks using number buttons:
You can play any track you want, just by pressing the
corresponding number button.
For the track numbers which are greater than 9 use +10
button. Each press increases the number by 10.Then type
the second digit of track number.
If you attempt to enter a number greater than the total
number of tracks on disc,
´
symbol appears on up-left
corner of screen.
¥ NOTE:
This operation is available only when PBC is off.(See
Page 20).
Repeat Play
Press PLAY MODE during playback.
Each time this button is pressed, a different repeat box is
displayed on the screen.
If REPEAT TRACK is displayed, the current track will be
played again.
If REPEAT ALL is displayed, the whole disc will be
played again.
If REPEAT OFF is displayed, the repeat mode is
disabled.
¥ NOTE:
Repeat Modes are available only when PBC is off.(See
Page 20)
Repeating sections between two specific points.(A
B repeat)
Press A-B RPT during playback at the point where repeat
play is to commence (A).
A TO B SET A is displayed on screen.
Press A-B RPT again at the point where repeat play is to
be concluded (B).
A TO B SET B is displayed and the repeat-play of the
selection between points A and B starts.
To return to normal play:
Press A-B RPT again. A TO B CANCELLED is displayed
and the A-B Repeat is disabled.
¥ NOTE:
If you give up entering the point B after entering A simply
press RETURN, and the operation is cancelled.
Convenient Functions
Displaying the time information
Press TIME during playback.
Each time this button is pressed, a different time information
box is displayed on the screen.
If SINGLE ELAPSED is displayed, the VFD display on the
unit shows the elapsed time for the track which is being
played
If SINGLE REMAIN is displayed, the VFD display on the
unit shows the remaining time for the track which is being
played
If TOTAL ELAPSED is displayed, the VFD display on the
unit shows the elapsed time for the disc which is being
played
If TOTAL REMAIN is displayed, the VFD display on the
unit shows the remaining time for the disc which is being
played
Displaying a scene with a larger and closer view
This zoom in function enables you to take a closer look at
the scene you are viewing.
This is especially a useful function when you are watching
science fiction or an adventure film.
Press ZOOM during playback.
You can change the zooming ratio by pressing ZOOM
button more than once.
¥ NOTE:
You can move in the picture i.e change the zoomed
location by using the 3/4/6/5 arrow keys.
To return to normal play:
After the biggest zoom ratio, press ZOOM again. Zoom
Off is displayed on the screen and the picture is now in
its normal size.
Intro - Digest menu
Press STOP button if it is in play mode.
Press MENU button in order to see the menu. This menu
contains:
1. Intro
2. Disc
3. Track
4. Exit