Filter
Top Products
- 24 - EN
Skip Forward / Backward
Press SKIP
9 or SKIP/STEP: during playback.
A track is skipped forward or backward each time the
button is pressed.
When the SKIP
9 button is pressed once midway through
a track, play returns to the start of that track. When it is
pressed again in quick succession, a previous track is
skipped each time the button is pressed.
Pause
Press PLAY/PAUSE once during playback.
The play suspends.
To return to normal play:
Press PLAY/PAUSE again.
Direct Selection of Tracks
Selecting by Time
You can play the audio CD starting from any time point you
want.
Press SEARCH on the remote control during playback.
The time search box is displayed on the screen as TRACK
TIME _ _ : _ _ : _ _ / xx : xx : xx
Enter the time using number buttons.
Player goes to the entered time of the current track.
Press SEARCH on the remote control two times during
playback.
The time search box is displayed on the screen as DISC
TIME _ _ : _ _ : _ _ / xx : xx : xx
Enter the time using number buttons.
Player goes to the entered time of the disc.
¥ NOTE:
If you give up entering the time simply press RETURN, and
the operation is cancelled.
If you wait ten seconds without pressing any key for
selecting tracks, the operation is cancelled.
Accessing tracks using number buttons
You can play any track you want, just by pressing the
corresponding number button.
For the track numbers which are greater than 9 use +10
button. Each press increases the number by 10.Then type
the second digit of track number.
If you attempt to enter a number greater than the total
number of tracks on disc,
´
symbol is displayed on
screen.
Repeat Play
Press PLAY MODE during playback.
Each time this button is pressed, a different repeat box is
displayed on the screen.
If REPEAT TRACK is displayed, the current track will be
played again.
If REPEAT ALL is displayed, the whole disc will be
played again.
If REPEAT OFF is displayed, the repeat mode is disabled.
¥ NOTE:
If the play list is active, the playlist is repeated instead of the
whole disc in Repeat All case.
Repeating sections between two specific points.
(A B repeat)
Press A-B RPT during playback at the point where repeat
play is to commence (A).
A TO B SET A is displayed.
Press A-B RPT again at the point where repeat play is to be
concluded (B).
A TO B SET B is displayed and the repeat-play of the
selection between points A and B starts.
To return to normal play:
Press A-B RPT again. A TO B CANCELLED is displayed
and the A-B Repeat is disabled.
¥ NOTE:
If you give up entering the point B after entering A simply
press RETURN, and the operation is cancelled.
Convenient Functions
Displaying the time information
Press TIME during playback.
Each time this button is pressed, an information box is
displayed on TV screen to indicate the status of the time
displayed on the VFD display.
If SINGLE ELAPSED is displayed, the VFD display on the
unit shows the elapsed time for the track that is being
played.
If SINGLE REMAIN is displayed, the VFD display on the
unit shows the remaining time for the track which is being
played.