Filter
Top Products
21
6
Reading
Press PLAY or OPEN/
CLOSE on the unit or on
the remote control.
The disc tray closes auto-
matically.
The TV-screen display,
changes to “Reading” and
then playback
commences.
• A menu screen will
appear on the TV screen,
if the disc has a menu
feature.
1
Press OPEN/CLOSE on
the unit or on the remote
control. The disc tray will
open.
2
Place a disc onto the tray.
Hold the disc, position it with
the printed label side up,
align it with the guides, and
place it in its proper position.
3
Press / or / to select desired title.
4
Press ENTER or PLAY.
• Title is selected and play commences.
5
Press STOP to end playback.
• The unit memorizes the stop location, depending on the
disc. “ ” appears on the screen. Press PLAY to
resume playback (from the stopped location).
• If you press STOP again or unload the disc (“
” appears
on the screen.), the unit will clear the stopped location
from its memory.
7
To stop playback, press STOP.
Then press OPEN/CLOSE on the unit or on the remote
control.
The disc tray opens.
Remove the disc and press OPEN/CLOSE on the unit or on
the remote control then press (POWER).
The disc tray closes automatically and unit turns off.
Note:
• If a non-compatible disc is loaded, "Incorrect
Disc", "Region Code Error" or "Parental
Error" will appear on the TV screen accord-
ing to the type of loaded disc. In this case,
check your disc again (See pages 10 and
33).
• Some discs may take a minute or so to start
playback.
• When you insert a disc with the label facing
downwards (ie. the wrong way up) and press
PLAY or CLOSE on the unit, "Reading" will
appear on the display and then "Incorrect
Disc" will be displayed.
• Some playback functions of DVDs may be
intentionally fixed by software producers.
This unit plays DVDs in accordance with the
design intent of the software producers.
Some playback features may not be avail-
able. Also refer to the instructions supplied
with the DVD.
• When playing DTS-encoded Audio CDs,
excessive noise will be heard from the ana-
logue stereo outputs. To avoid possible
damage to the audio system, take proper
precautions when the analogue stereo out-
puts of the DVD player are connected to an
amplification system.
SKIP
DISPLAY
OPEN/CLOSE
SUBTITLE
AUDIO
SEARCH
(JUMP)
ENTER
CLEAR
(CANCEL)
SET UP
A - B RPTMARKER
PLAY MODE
ANGLE
PAUSE/STEP
ZOOMSLOW
RETURN
TOP MENU
PLAY
STOP
REV FWD
0T
8
79
654
321
SKIP
MENU
Playback procedure
2B50101A P12-21 8/21/02, 3:27 PM21