Filter
Top Products
57
Function setup
Picture
Setting : Interlaced
Setting : Progressive
Progressive 4:3 Output
Progressive Conversion
TV Shape
4:3 LB
1
1
2
3
1
Full
Auto
A
B
C
Off
Blacker than Black
Progressive 4:3 Output
DVD-V VCD
Select the video output of pictures recorded in 4:3
format. (Only when connected to a PROGRESSIVE
TV.)
4:3: Displays images in 4:3 aspect ratio with
masking bars to the left and right of the picture.
Full: Displays pictures expanded horizontally to fill
the 16:9 screen.
Progressive Conversion
DVD-V VCD
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and
video content (video signals recorded at 30 frames
per second). Make this selection according to the
type of content being viewed.
Auto: Select this position normally.
The DVD player automatically detects source
content, film or video, of playback source, and
converts that signal in the progressive output
format in an appropriate method.
Video: The DVD player filters video signal, and
converts it in the progressive output format
appropriately.
Suitable for playback of video content
pictures.
Film: The DVD player converts film content pictures
in the progressive output format appropriately.
Suitable for playback of film content pictures.
The progressive output feature will be most
effective under this selection.
Note
Depending on the disc, pictures may be cut off or
doubled. In this case, select “Video.”
Setting : Progressive
Brightness
Color
Tint
Edge Enhance
Contrast
0
0
0
0
On
A
B
C
Setting : Progressive
DVD-V VCD
You can fine adjust picture quality and store up to 3
picture settings in the memory of the DVD player.
(Only when connected to a PROGRESSIVE TV.)
To select a preset memory setting:
1) Move the cursor control ( / ) to select a
memory number (1 to 3), and press the ENTER
button.
2) Move the cursor control (
/ ) to select the
element, and press the ENTER button.
3) Move the cursor control (
/ ) to adjust the
value, and press the ENTER button.
(-7) Lower Contrast Higher (+7)
(0) Darker Brightness Brighter (+14)
(-7) Duller Color Brighter (+7)
(-7) Redder Tint Greener (+7)
Edge Enhance
To enhance picture edges.
(Off < On < Expanded1 < Expanded2)