Filter
Top Products
49
Function setup
E.A.M.
VCDDVD-V CD
You can obtain expansive virtual surround sound
effects from just two speakers.
Normal: Normal sound.
3D: To obtain expansive virtual surround sound
effects from just two speakers.
Note
Pressing the E.A.M. button on the remote control also
allows you to achieve the same setup.
36
D.R.C.
DVD-V
Turn on or off a function that makes faint sounds
easier to hear even if you lower the volume during
late hours playback.
D.R.C. = Dynamic Range Control
On : Dynamic range is reduced.
Off : Full dynamic range is maintained.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Control may differ
depending on the DVD disc.
AUDIO MENU
D.R.C. On 3D
Digital Out Analog 2ch
E.A.M. Normal Normal
Digital Out
VCDDVD-V CD
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see
40
.
Bitstream: Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.
58
59
The player outputs digital audio signal
in the bitstream format when you play a
DVD video disc recorded in the Dolby
Digital, DTS, MPEG1 or MPEG2
recording system.
Analog 2ch: Select when connected to a TV or
stereo system via the analog audio
jacks.
54 55
PCM: Select when connected to a 2 channel
digital stereo amplifier.
59
The player outputs sounds in the PCM
2ch format when you play a DVD video
disc recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
SD-P1600_E_P45-52 05.1.14, 10:42 AM49