Filter
Top Products
Introduction
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Using the TV’s
Features
Appendix
Index
39
Adjusting the sound
Muting the sound
Press MUTE to temporarily turn off the sound. While the sound is
off, the screen will display the word MUTE in the lower right corner.
To restore the sound, press MUTE again.
When you press the MUTE button, you automatically activate the
closed caption feature. To deactivate this feature, press the MUTE
button again. This feature only works when the closed caption mode
is set to OFF. See “Using the closed caption feature” on page 37 for
more information.
Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while you watch TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time you turn the TV on, change the
channel, or press RECALL.
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
234567891011 12 13 14 1516 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
AUD OI
MTS
BASS
MONO
50
50
0
TREBLE
BALANCE
RESET
2. Press y or z to highlight MTS.
3. Press x or • to highlight STEREO.
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
234567891011 12 13 14 1516 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
12345678910111213141516171819
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
AUD OI
MTS
BASS
STEREO SAP MONO//
50
50
0
TREBLE
BALANCE
RESET
You can leave your TV in STEREO mode because it
automatically outputs the type of sound being broadcast (stereo
or monaural). If the stereo sound is noisy, select MONO to
reduce the noise. The word STEREO or SAP displays in yellow
in the menu when the TV receives the signal.
To listen to SAP (if available):
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS.
3. Press x or • to highlight SAP. You will hear the station’s second
audio program (if available) from the speakers while viewing the
original program’s picture (see note at right).
RECALL
MUTE
yzx •
MENU
Note :
A second audio program (SAP) can be heard
only on those TV stations that offer it. For
example, some TV stations broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program’s normal audio.
If you have SAP on, and the station you are
watching is not currently broadcasting a
second audio program, you will see the
picture but not hear any sound. If this
happens, but the TV in STEREO mode so
you can hear the station’s normal audio.
123
456
789
ENT
100
0
CH
VOL
POWER
TIMER
RECALL
TV/VIDEO
MUTE
TV
CABLE
VCR
CH RTN
EXIT
LIGHT
STOP SOURCE
ADV/
PIP CH
ADV/
PIP CH
FAV
FAV
PLAY PIP
REC TV/VCR REW FF
STILL LOCATE SWAP
MENU
C.CAPT
RESET
ENTER