Filter
Top Products
25
RECORDING
Timer Programming Procedure
Example: To record cable channel 25 in the SP tape speed from
9:30 p.m. until 10:00 p.m. on August 30. Today is August 25.
1
Load a cassette with the safety tab attached.
2
Press
PROG
. to display the MENU screen.
3
Select “PROGRAM” using
FF
or
REW
, and press
ENTER
.
4
Move to the next using
FF
, and
select the channel number 25 by
pressing
number buttons
2 and 5,
PLAY
or
STOP.
• To record a cable program from the connected cable box:
Enter the cable channel number by
number buttons
,
PLAY
or
STOP.
If your cable box is not remote-controllable, choose the desired
channel (1 to 125) on the cable box.
To make corrections:
Press
REW
to move back to the item, or
FF
to forward.
(Continued)
Timer Program Recording
The programmable timer allows you to record up to 6 different programs over one month.
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Make sure that the clock is set correctly (page 15).
• Store the channels on the VCR (pages 16 and 17).
• If you record cable channels, finish the cable box set-up (pages 12), and turn on the cable box.
RECORDING
E
n
D : PROG
CH DATE O
n
OFF SPD
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
E
n
D : PROG
CH DATE O
n
OFF SPD
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
- - -/-- -:- - -:- - -
2 5 -/-- -:- - -:- - SLP
78
0
100
9
65
23
4
1
STOP
PLAY
FFREW
CANCE
L
4
2, 9
3
3-8
10
W-604 04 ENG 2/12/01, 2:26 PM25