Filter
Top Products
33
RECORDING
78
0
100
9
65
23
4
1
STOP
PLAY
FFREW
100
PLAY, STOP
POWER
(CABLE BOX
)
CH
(CABLE BOX
)
FF
ENTER
PROG.
REW
I.SELECT
Preparation
• Select the video channel (3 or 4) or video input mode on the TV.
• Set “TV/CATV” on the CH MEMORY screen to “CATV” (page 16).
(Example)
(Continued)
Number
buttons
Cable Box Set-up
1
Press
PROG.
to display the MENU screen.
2
Select “PRESET” using
FF
or
REW
, and press
ENTER
.
3
Select “CABLE BOX/DSS” using
PLAY
or
STOP
, and press
ENTER
.
4
Select “NO” or “C.BOX” using
FF
or
REW
according to your
connection type.
NO: • Type A
• Type C (A/B switch “A”)
• Cable channels will be selected using
CH/TRK on the remote control or
CHANNEL on the VCR.
→ Go to step 8.
C.BOX: • Type B
• Type C (A/B switch “B”)
• Type D
→ Go to step 5.
5
Select “OUTPUT CH” using
PLAY
or
STOP
, and enter either
of the following according to your connection.
Type B, C: the output channel number of
your cable box using
number buttons
.
(Usually 3 or 4. Check the rear of the
cable box.)
Type D: the line input mode “L1” using
I.SELECT
.
6
Select “CONTROL” using
PLAY
or
STOP
, and set to “ON” or
“OFF” using
FF
or
REW
.
ON: if your cable box is remote-
controllable.
• Cable channels will be selected by CH
(CABLE BOX) on the remote control.
The VCR can change the cable
channel to the desired one when timer
recording or VCR Plus+ C system
recording starts.
→ Go to step 7.
OFF: if your cable box is NON remote-
controllable.
• Cable channels will be selected by the
own channel selector of the cable box.
The VCR channel should be set to the
output channel of the cable box.
→ Go to step 8.
3
®
SET UP
PRESET
PROGRAM
USE no c. Box DSS
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 02CH
COnTROL Off on
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 03CH
CO
n
TROL Off on
E
n
D : PROG
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 03CH
CO
n
TROL Off on
BRA
n
D TYPE no. 00
E
n
D : PROG
SET UP
PRESET
PROGRAM
USE no c. Box DSS
OUTPUT CH 03CH
CO
n
TROL Off on
W-608/TSB (ENG) 1/17/01, 11:05 AM33