Filter
Top Products
4
Press OK to select.
Press
R
to select System and use
P
or Q to
change (if required, see page 7).
8
Manual tune
As an alternative to Auto Tuning, the TV can be tuned-in manually using Manual Tuning. For example: if
the television cannot be connected to a video/decoder with a Scart lead or to tune-in a station on another
System (see page 7).
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See page 7.
Search: Search up and down for a signal.
Programme skip:
*
means nothing has been stored or the facility to skip the channel is ON. See page 9.
Channel: The channel number on which a station is being broadcast.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 10.
Station Name: Station identification. Use the
P
or Q and
S
or
R
buttons to enter up to seven characters.
Station Name
Programme System Search
Programme skip/
Channel
Manual fine
tuning
Use
P
or Q to highlight the programme position
required e.g. we suggest Prog. 0 for a video.
Press MENU and using
S
or
R
select the Set up
menu, with Q highlight Manual tuning, press
R
to select.
Different
Channel
numbers
may be
displayed
Continues on the next page
To allocate a programme position on the television for a decoder and VCR: turn the decoder on, insert a
pre-recorded tape in the video and press PLAY, then manually tune.
Use
S
and
R
to move across the screen and select any of these Manual Tune options.
1
2
3
Set up
Language
z
English
x
Country
z
GB
x
Auto Tuning
x
Manual Tuning
x
Programme Sorting
x
Teletext Mode
z
List
x
EXIT
To Exit
fe
Select
zx
Adjust
Manual Tuning
f
Prog. Channel Station
0 60 VCR
1 22 BBC1
2 28 BBC2
325ITV
4 32 CH4
5*69
e
EXIT
Watch TV
fe
Select
MENU
Previous
zx
Change
OK
Change
Manual Tuning
System
f
z
0 I 60 0 VCR
x
e
EXIT
Watch TV
zx
Select
MENU
Previous
fe
Adjust
OK
Store