Filter
Top Products
22
Questions and Answers continued
▼▼▼
▼ ▼
Language
ENGLISH
Colour
AUTO
Teletext
Set up
EXIT :To exit
A
Good performance of text depends on a good
strong broadcast signal. This normally requires a
roof or loft aerial. If the Text is unreadable or garbled,
check the aerial. Go to the main index page of the teletext
service and look for the User Guide. This will explain the
basic operation of teletext in some detail. If further
information is needed on how to use text see the
teletext section.
Why are there problems with teletext?
Q
A
There are none broadcast or they have not yet
loaded. Press the
X
(
B
)
buttton to access.
(See teletext section).
Why are there no teletext sub-pages?
Q
A
If surround sound effects are unavailable from the
rear speakers whilst playing a Dolby Surround
video tape, check that the VCR is a stereo unit and is
connected by a Scart lead. Then check the Surround set
up in the Feature menu.
Why is there no Dolby Surround?
Q
A
If full Dolby Digital is unavailable, check that the
Rear speaker option in Surround set up is set to
YES, that the equipment is connected by optical or coaxial
cable as well as through a Scart socket or COMPONENT
VIDEO OUTPUT. Also check that EXT2 or EXT4 is selected
in AV connections.
If external front speakers are connected the External
speaker switch must be set to EXT to get the full benefit of
Dolby Digital. If the switch is set to INT the external
speakers will not function. Turn the TV off before
changing the position of the switch.
Why is there no Dolby Digital?
Q
A
Connect the source via a Scart lead and play.
Select the Set up menu.
Why are the colours wrong when an NTSC
source is played?
Q
Set the Colour to AUTO and exit.
Go to the Picture menu and adjust the tint.
1
2
A
Remove it by pressing CALL.
Why is there a message permanently on the
screen?
Q
A
Check the Scart lead connections.
Why is there sound but no picture from external
equipment?
Q
A
Check that the External speaker switch has been
set to EXT.
Why is there no sound from the external front
speakers?
Q
A
Check the Scart lead connections. Check the AV
Connections. Make sure Digital Input has not
been selected.
Why is there no sound from external
equipment?
Q
A
Check that the Rear speaker option in Surround
set up is set to YES and the Surround out option
is set to SP OUT.
Why is there no sound from the external rear
speakers?
Q
A
Check that the Rear speaker option in Surround
set up is set to YES and the Surround out option
is set to EXTERNAL.
Why is there no sound from the connected
external amplifier?
Q
K7815 32/36ZP38B 17/3/03 3:49 pm Page 22