Filter
Top Products
6
Connecting the speakers
In order to enjoy the full benefits of Surround Sound/Dolby Digital it is necessary to connect two rear
surround speakers and two front extension speakers. External Hi-Fi speaker specifications must be
8 ohm, 10W minimum.
TV
Front Extension
(Main) Speaker
Front Extension
(Main) Speaker
Surround
Speaker
Surround
Speaker
When connecting external speakers always make sure
that the power is OFF. Do not attempt to SHARE
external speakers with your Hi-Fi as serious damage
may occur.
The front speakers should be positioned either side of the
TV and will deliver the left and right sound. The internal
speakers will then deliver the centre channel when
required. These are suggested positions only. Place the
speakers to suit and adjust the balance as necessary.
To connect extension front speakers press the connectors
of the Main speaker terminals on the back of the TV and
insert the cables. The switch must now be set to EXT as
shown.
Make sure that the lead with the stripe (or raised
edge) is connected to the RED terminal and the other
(smooth) lead is connected to the BLACK terminal.
To connect surround speakers press the connectors of the
Surround speaker terminals on the back of the TV and
insert the cables.
These speakers should be sited in line with the normal
viewing position.
Make sure that the lead with the stripe (or raised
edge) is connected to the RED terminal and the other
(smooth) lead is connected to the BLACK terminal.
Positioning the speakersPositioning the speakers
Extension front speaker connections
Surround speaker connections
To use an external amplifier to power the surround
speakers insert the phono plugs into the Surround out
connections on the back of the TV.
No sound will come from the Surround Sound terminals if
this option is chosen.
Using an external amplifier
K7815 32/36ZP38B 17/3/03 3:49 pm Page 6