Filter
Top Products
User’s Guide
SBFTF10xx-15x
Stand-Alone Media Converter
• Copper to Fiber
• 10/100 Bridging (2-Port)
• 10Base-T/100Base-TX to 100Base-FX
The SBFTF10xx-15x 2-port Ethernet/Fast Ethernet
bridging media converter connects 10Base-T
Ethernet or 100Base-TX Fast Ethernet twisted-pair
copper network devices to network devices on a
100Base-FX Fast Ethernet fiber network.
SBFTF1029-150** RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 20 km (12.4 miles)*
SBFTF1029-151** RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 20 km (12.4 miles)*
SBFTF1029-152*** RJ-45
100 m (328 ft)*
SC, 1310 mn (TX)/1550 nm (RX)
single mode, 40 km (24.8 miles)*
SBFTF1029-153*** RJ-45
100 m (328 ft)*
SC, 1550 mn (TX)/1310 nm (RX)
single mode, 40 km (24.8 miles)*
Part Number Port One - Copper
10Base-T/100Base-TX
Port Two - Duplex Fiber-Optic
100Base-FX
SBFTF1011-150 RJ-45
100 m (328 ft)*
ST, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1013-150 RJ-45
100 m (328 ft)*
SC, 1300 nm multimode
2 km (1.2 miles)*
SBFTF1014-150 RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
20 km (12.4 miles)*
SBFTF1015-150 RJ-45
100 m (328 ft)*
SC, 1310 nm single mode
40 km (24.8 miles)*
SBFTF1018-150 RJ-45
100 m (328 ft)*
MT-RJ, 1300 nm multimode
2 km (1.2 miles)*
* Typical maximum cable distance. Actual distance is dependent upon the
physical characteristics of the network. (TX) = transmit (RX) = receive
** SBFTF1029-
150 and SBFTF1029-151 are intended to be installed in the same
network where one is the local converter and the other is the remote
converter.
*** SBFTF1029-
152 and SBFTF1029-153
are intended to be installed in the
same network where one is the local
converter and the other is the remote
converter.
Installation . . . . . . . . . . . . . . . . . .2
Operation . . . . . . . . . . . . . . . . . . .5
Cable Specifications . . . . . . . . . . .7
Technical Specifications . . . . . . . .9
Troubleshooting . . . . . . . . . . . . .10
Contact Us . . . . . . . . . . . . . . . . .11
Compliance Information . . . . . . .12