Filter
Top Products
31
Copy channels to
USB stick
Copies the list of channels from the set-top box to the USB
stick placed in the USB socket.
Restore channels
from USB stick
Copies the list of channels from the USB stick placed in the
USB socket to the set-top box.
Copy provider list to
USB stick
Copies the list of CATV providers from the set-top box to the
USB stick placed in the USB socket.
Restore provider list
from USB stick
Copies the list of CATV providers from the USB stick placed in
the USB socket to the set-top box.
Advanced
Transparency
Select whether you want menus and information bar to be
transparent.
Banner time
Select the number of seconds the info banner is displayed
when you change channel. Maximum time for displaying the
information banner is 10 sec.
Low power standby
Select whether you want low power consumption when the set-
top box is in standby mode. If you select “On”, the loop through
from the antenna socket ANT in to the antenna socket ANT
out on the set-top box will not be active.
OTC software
update
Select OTC software update and the software of your set-
top box will be updated if your CATV provider has made new
software available. If new software is unavailable you will get a
message telling you so.
Factory reset
Select Factory reset if you want to bring all settings back to
factory settings.