Filter
Top Products
32
Updating software via USB stick
It is also possible to download software from the home page www.triax.com to an USB
stick and then update the set-top box using the USB stick.
The file that you download from the home page to the USB stick is an “.img” file. You must
place the “.img” file in the root of the USB stick, and not in a folder that you have created
on your USB stick. The USB stick must not contain other “.img” files.
Do the following to update the set-top box using the USB stick:
⇒ Switch on the set-top box so you get a picture on the TV screen.
⇒ Switch the set-top box off, i.e. turn off the mains switch.
⇒ Insert the USB stick into the USB socket at the rear of the set-top box.
⇒ Switch the set-top box on at the mains switch.
The following message is displayed on the TV screen.
When the download is finished, you have to restart the set-top box, i.e. you have to turn off
the mains switch and then turn it on again.