Filter
Top Products
- 10 -
In LNB NO line, 8 or 16 different LNB configurations (corresponding to the LNB NO
line in the installation page) can be chosen by using +,- (8 for DiSEqC OFF, 16 for
DiSEqC ON mode). At every LNB NO changing, the video frequency is driven accord-
ing to selected LNB frequency.
User can switch to second customizing page by pressing P+ in this line.
In PR. FREQ. line, the program frequency can be entered in two different ways:
i) Direct access. For example to enter 10921MHz just press 1-0-9-2-1 buttons one
by one.
ii) Increasing/decreasing frequency with 1 MHz steps using + ,- buttons.
By pressing continually to + or -, video search begins. Video search stops auto-
matically after tuning to another program or until the end of frequency band if there is
no program after/before the frequency that video search began. User can exit video
search manually by pressing TV button only.
In AUDIO NO line, audio frequency can be chosen among 15 preset audio frequen-
cies or user-defined 16
th
mode. The user can change the audio frequency and mode
only when audio no is 16. While the other 15 numbers are selected, user cant reach
these lines by pressing P- button in this line.
At the 16
th
audio type, in the AU. MODE line, Stereo/Mono is switched for this audio
frequency. In the AU. FREQ. line, the audio frequency is changed like program fre-
quency. The range for audio frequency is between 5.00 -9.00 MHz.
In the SYSTEM line, select
TV to watch a channel
RADIO to listen to audio only with blue background on screen. A musical note sym-
bol will appear in program page if a program is set to radio.
PAL DEC. to watch a pay TV channel that can be only watched by PAL decoder
MAC DEC. to watch a pay TV channel that can be only watched by a D2MAC decoder.
DEEMPH. to watch a pay TV channel that can be only watched by a D2MAC decoder.
In this line, user can switch to second customizing page by pressing P-.
At the DEEMPH. line, 3 different de-emphasis modes can be selected. These are
FLAT, 50µs, 75µs.
At the AUDIO BW line, 7 different audio bandwidth modes (80/110/130/180/ 230/380/
500kHz) can be selected.
At theDNR line, Dynamic Noise Reduction can be switched as ON/OFF with +,
- buttons.
CONTRAST line is used to adjust the contrast level of programs from 1 up to 50 with
+, - buttons.
In PR. LOCK line, by selecting YES with +, - buttons, parental lock is set. The
user will see blue background even if there is a video signal. And a lock character
will appear under the program number after exiting the menu.