Tripp Lite B118-004 TV Cables User Manual


  Open as PDF
of 8
 
3
Standard Installation Instructions
Note: The maximum distances referenced in these instructions have been tested at a video
resolution of 1080p (60Hz) with 36-bit (12-bits per channel) Deep Color using 28AWG HDMI
cables. Longer distances between the splitter and connected monitors are achievable using 24AWG
HDMI cables and/or a source that is set to display a lower video resolution.
1
Makesurethatthepowertoalldevicesthatyouwillbeconnectingis
turned off.
2
ConnecttheHDMIsourcetotheInputportonthesplitter.
Note: The length of the HDMI cable connecting the source to the splitter must not exceed
13 ft. (4 m).
3
ConnectanavailableOutputportonthesplittertotheHDMIinputport
of your display.
Note: The length of the HDMI cable connecting the splitter to the display must not exceed
16 ft. (5 m).
4
Repeatstep3fortheremainingOutputportsonthesplitter.
5
Connecttheincludedpowersupplytothesplitter,andthenplugit
intoaTrippLiteSurgeSuppressor,PowerDistributionUnit(PDU),or
UninterruptiblePowerSupply(UPS).
6
TurnonthepowertotheHDMIsourceanddisplays.
13-07-120 93-32BD.indd 3 8/2/2013 4:04:44 PM
 previous next