Tripp Lite B125-150 TV Cables User Manual


 
TMDS
UP TO 150 ft.
LOCAL
TRANSMITTER
BLU-RAY
1080p (24 Hz)
or
1080i (60 Hz)
REMOTE
RECEIVER
DDC
DISPLAY
B125-150 Installation Diagram
2
Installation and Operation
Refer to the installation diagrams below as you perform these steps.
Note:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, use 24AWG solid wire Cat5e/6
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge size higher
than 24AWG will result in shorter extension distance. All Tripp Lite N202-Series
Cat6 cables are made with 24AWG, solid wire cabling.
3. Make sure the power to all devices you are connecting to is turned off prior to
installation.
Product Features
•Extendeithera1080p(24Hz)or1080i(60Hz)signalupto150ft.
fromthesourceusingCat5e/6cabling
•Fullyautomaticequalizationupto40dB;nosystemcontrolrequired
•HDCPcompatible
Optional Accessories
•N202-SeriesCat624AWG,solidwirepatchcables
•P568-SeriesHighSpeedHDMIcables
201112150-93-3153.indd 2 1/4/2012 11:49:36 AM