Tripp Lite B125-150 TV Cables User Manual


  Open as PDF
of 4
 
3
1
ConnecttheHDMIsourcetotheHDMIinputonthelocaltransmitterunit.
2
Connect the TMDS RJ45portonthelocaltransmittertotheTMDS
RJ45portontheremotereceiverusingCat5e/6cable.
Note: See the installation diagrams for maximum extension
distance at 1080p (24 Hz) / 1080i (60 Hz) video resolutions.
3
Connect the DDC RJ45portonthelocaltransmittertotheDDC
RJ45portontheremotereceiverusingCat5e/6cable.
Note: See the installation diagrams for maximum extension
distance at 1080p (24 Hz) / 1080i (60 Hz) video resolutions.
4
ConnecttheHDMIoutputontheremotereceivertotheHDMImonitor.
5
Connecttheexternalpowersupplytotheremotereceiver,andthen
plugitintoaTrippLiteSurgeSuppressor,UninterruptiblePowerSupply
(UPS),orPowerDistributionUnit(PDU).TheGreenLEDontheremote
unitwillilluminatetoindicatethatpowerisbeingreceived.
6
TurnonthepowertotheHDMIsource.
Note: The Red LED on the Remote Receiver unit will illuminate only
if a working signal is NOT being received. The unit is functioning
properly when this LED is not illuminated.
Installation and Operation
201112150-93-3153.indd 3 1/4/2012 11:49:36 AM
 previous