Filter
Top Products
23
Picture control
adjustment in the PC mode
You can adjust to optimize the performance of
the TV in the PC mode.
1
Press INPUT SELECT, then press ϳ/ϴ or
Number button (4) to select the PC mode.
2
Press SETUP/TV MENU. The TV menu screen
will appear.
3
Press ϳ or ϴ to select “Picture”, then press ϶ or
ENTER.
4
Press ϳ or ϴ to select “PC Setting”, then press ϶
or ENTER.
The PC Setting menu will appear.
Ver Position
Clock
Phase
: Adjust
25
0
25
PC Setting
Hor Position
25
: Select ENTER:Set
5
Press ϳ or ϴ to select the desired item you want
to adjust.
6
Press ϵ or ϶ to adjust the setting.
Hor
Position:
To adjust the horizontal position of
the image on the PC mode.
Ver
Position:
To adjust the vertical position of the
image on the PC mode.
Clock: To minimize any vertical bars
or stripes visible on the screen
background.
Phase: This must be adjusted after the
frequency of the PC mode has
been set to 60Hz to optimize
picture quality (page 38).
7
After adjusting, press ENTER to return to the PC
Setting menu. Then continue to adjust the other
items.
8
Press EXIT/CANCEL to return to the normal
screen.
NOTE:
If no buttons are pressed for more than approx. 60
seconds, the Menu-screen will return to normal
Monitor-screen automatically.
The PC settings are not effective for other input
modes.
DNR
DNR (Digital Noise Reduction) can reduce
the roughness of the picture. (This function is
available only for analog broadcast.)
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
•
•
2
Press ϳ or ϴ to select “Picture”, then press ϶ or
ENTER.
3
Press ϳ or ϴ to select “DNR”. Press ϵ or ϶ to
select “On” or “Off”.
Picture Preference Sports
Picture Size >>
Film Mode On
Picture
Picture Setting >>
PC Setting >>
DNR On
: Adjust
: Select
4
Press EXIT/CANCEL to return to the normal
screen.
Sound control
adjustment
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press ϳ or ϴ to select “Audio” , then press ϶ or
ENTER.
3
Press ϳ or ϴ to select the item you want to
adjust.
Treble
Balance
MTS Stereo
Audio Language No Info.
HDMI Audio HDMI
Audio
15
0
: Adjust
15
Bass
: Select
Bass: Press ϵ or ϶ to adjust the bass sound.
Treble: Press ϵ or ϶ to adjust the treble sound.
Balance:Press ϵ or ϶ to obtain an equal sound
level from both speakers.
Press ϳ or ϴ to change the adjusting item.•
4
After you desired setting, press EXIT/CANCEL to
return to the normal screen.
Selecting Stereo/Second
Audio Program (SAP)
The multi-channel TV sound (MTS) feature
provides high-fidelity stereo sound. MTS also
can transmit a second audio program (SAP)
containing a second language or other audio
information.
When the TV receives a stereo or SAP broadcast,
the word “Stereo” or “SAP” displays on-screen
every time you press DISPLAY.
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press ϳ or ϴ to select “Audio”, then press ϶ or
ENTER.
3
Press ϳ or ϴ to select “MTS”, then press ϵ or ϶
to select “Stereo”.
51H0101A_eng.indd 23 08.3.7 5:39:18 PM