Filter
Top Products
15
CONNECTING EXTERNAL VIDEO SOURCES
CONNECTING A STEREO LASERDISC PLAYER OR DVD PLAYER TO INPUT 4.
1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 4 (Y) jack as shown on the TV set below.
2. Connect the cable from the P
B
OUT, C
B
OUT or B-Y OUT of the Laserdisc or the DVD player to the INPUT 4 (P
B
) jack, as shown
on the TV set below.
3. Connect the cable from the P
R
OUT, C
R
OUT or R-Y OUT of the Laserdisc or the DVD player to the INPUT 4 (P
R
) jack, as shown
on the TV set below.
4. Connect the cable from the AUDIO OUT R of the Laserdisc or DVD player to the INPUT 4 (AUDIO/R) jack.
5. Connect the cable from the AUDIO OUT L of the Laserdisc or DVD player to the INPUT 4 (AUDIO/L) jack.
6. Press the INPUT button until Y-PbPr:4 appears, to view the program from the Laserdisc or DVD player. The Y-PbPr:4 icon disap-
pears automatically after approximately eight seconds.
7. Press the INPUT button to return to the previous channel.
NOTES: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will
be abnormal if the connection is loose.
See page 11 for tips on REAR PANEL CONNECTIONS.
TV INPUT 4
TERMINAL
BACK OF DVD PLAYER
HITACHI Model
or similar model
Y C C
VIDEO
OUTPUT
BR
R L
AUDIO
AUDIO
(MONO)/L
R
INPUT 4
Y/VIDEO
P
B
P
R