Filter
Top Products
16
Activating Caller ID on Call Waiting (HS1 only)
Caller ID allows you to see the name and number of the calling party before you answer the phone. Caller ID on Call
Waiting (CIDCW) lets you see the name and number of a call that comes in when you are on the line. You must
subscribe to Caller ID service through your local telephone provider to use this feature.
1) When the phone is in standby, press and hold
[cid/menu]. The following screen appears.
2) Press
[ ] to move the pointer to select CIDCW.
3) Press
[select/channel] to toggle and turn on Caller ID on Call Waiting.
4) Press
[end] and return the handset to the base unit to complete the setting. The handset
returns to standby.
Note: To enable the setting change of CIDCW, you need to return the handset
to the base unit when you complete the setting.
Programming Your Area Code
In some areas the telephone company may allow you to place a local call by dialing only seven digits (instead of
ten).
If this is the case in your area, you can program your local area code in your phone. Programming your area code
will allow you to see the caller’s seven-digit phone number which will allow you to easily return the local call without
modifying the number before dialing. If you get a call from outside your area code, you'll see all ten digits.
To program your area code:
1) When the phone is in standby, press and hold
[cid/menu]. The following screen appears.