Universal Electronics OARC05G Universal Remote User Manual


 
6
(transport keys for DVDs, VCRs,
PVRs, DVRs) These keys operate the transport functions
(play, fast-forward, rewind, etc.) of your device. To prevent
accidental recording, the (RECORD) key must be pressed
twice to start recording.
In TV mode the
key activates Picture-In-Picture (if available
on your TV), and the key swaps between the main picture
and the Picture-In-Picture.
FORMAT This key provides you the (16:9) wide screen view
function (if available on your original remote).
Code Retrieval
The code retrieval feature allows you to nd out which code is
currently programmed for each device key. This is useful if you
used the Search Method to program a device key.
1. Press the device key once.
2. Press and hold down the SET key until the
(power) key
blinks twice (the key blinks once, then twice).
3. Press 9 9 0. The
(power) key blinks twice.
4. For the rst digit of your ve-digit code, press 1 and count
all the blinks. If there are no blinks, the digit is “0”.
5. For the second digit, press 2 and count all the blinks. If
there are no blinks, the digit is “0”.
6. For the third digit, press 3 and count all the blinks. If there
are no blinks, the digit is “0”.
7. For the fourth digit, press 4 and count all the blinks. If there
are no blinks, the digit is “0”.
8. For the fth digit, press 5 and count all the blinks. If there
are no blinks, the digit is “0”. Now you have your ve-digit
code.
Quick Code Reference
Device Type Code