Filter
Top Products
4. Aim the Millennium 3 at your Cable Converter
or DBS Receiver and press CBL once.The unit
should turn off.If it does not respond,repeat
steps 2-3,trying each code listed for your brand
until you find one that works.If it still does not
work ,try searching for the code (see Searching
For Your Code on page 22).
5. Write your Cable Converter or DBS Receiver
code in the boxes below for future reference.
NOTE: Remember, to use the Millennium 3 to operate your Cable
Converter or DBS Receiver,press
CABLE
first.
To lock the Cable key:
1. On the Millennium 3,press CBL once.Press
and hold SETUP until the LED blinks twice,
then release SETUP.
2. Enter 9 - 9 - 7.The LED will blink twice.
3. Press CH + once.The LED will blink twice.
Setup Codes for Cable Converters:
ABC 0003,0008,0017,0013
ABC Cable 0033
Americast 0899
Contec 0019
General Instrument
0476,0276,0810
GoldStar 0144
Hamlin 0020,0259
Jerrold 0003,0012,0476,0276,0810
Macom 0033
Memorex 0000
Movie Time 0063
NSC 0063
Oak 0019
Optimus 0021
Panasonic 0000,0107,0021
Paragon 0000
Pioneer 0144,0533
Pulsar 0000
Quasar 0000
RCA 0021
Regal 0020,0259
Runco 0000
continued on next page...
19
Millennium 3 Mnl M3090 8/16/99 9:26 AM Page 19